The same search phrase, two different products
An integrated ring case combines a phone case and a ring holder in one part. The ring may be bonded to the case or built into its structure. A separate ring holder is an accessory with an adhesive back: it attaches to a plain or magnetic case and can provide one-hand grip, a viewing stand and a magnetic face for mounting. The customer sees one solution on the shelf, but the supply chain sees different products. In an integrated design, the case colour, phone fit, ring position and hinge all belong to one SKU. In a separate system, the case and the ring holder can be ordered, stocked and replaced independently.
This distinction matters most when the product is described online. "Phone case with ring" should not be used for a case whose back is magnetic but which has no ring. We do not describe the PU Case that way. It is a PU leather and TPU magnetic phone case, not an integrated ring case.
Integrated ring case vs separate ring holder
| Decision | Phone case with built-in ring | Phone case + separate ring holder |
|---|---|---|
| For the end customer | One-piece product; nothing to align or install | Two parts; the ring holder is installed once |
| For the brand | A stronger single product story, but every case fit is a new SKU | Case colours and ring holder models can be planned separately |
| Replacement | A damaged ring or hinge usually means replacing the case | Replace the ring holder without replacing every case |
| Customization | Case, ring position and hinge must be developed together | Customize the case artwork and the ring holder finish independently |
| Best when | The ring is the main product feature and the range is narrow | The range has many phone models, colours or market tests |
| Operational risk | More model-specific tooling and stock | More product combinations and installation guidance |
The inventory problem is rarely obvious in the sample photo
An integrated ring case looks simple on a product page. In stock, each phone fit multiplies the number of cases that must be held, and a ring colour change can force another finished-goods SKU. A separate holder moves part of that variety to one accessory line. The brand can carry fewer case variants and change holder finishes without rebuilding every case SKU. The trade-off is that buyers must explain installation and compatibility clearly, or customers will return the product because they expected a finished assembly.
For a first market test, the separate route is often easier to control because every ready-molded model starts at 50 pcs per model. For a focused flagship range where one-piece presentation is the main selling point, an integrated case can make sense. That is an ODM decision: send the phone model, ring position, hinge requirement and target market, and we review the structure before confirming whether it can be developed.
How the separate holder fits our case range
The Pai8 is a folding magnetic ring holder with an aluminium-alloy body, an N52 magnet and a 360° ring. Its adhesive back gives a phone or case a grip, a stand and a magnetic mounting surface. The CX-5 takes the same idea into a thinner 360° format: a 58 × 3.8 mm aluminium body, 18 g, an N52 magnet measured at about 4,100 GS, and an SK7 shaft cycle-tested beyond 6,000 open-close movements.
The OX-3 is the choice for buyers whose customers use thicker rugged cases or need a magnetic car-mount system. It uses a 58 × 4.5 mm aluminium body, weighs 25 g and carries an N52 magnet measured at about 4,100 GS. The ring holder is not a universal answer to every case surface. The buyer must test the exact case back, especially TPU, silicone, leather, PU and textured or coated finishes. A poor surface can make the adhesive fail long before the magnet does.
The PU Case follows the other route: PU leather on the back, a TPU frame and a magnetic plate. It is intended to work with magnetic ring holders, car mounts and desk stands, while keeping the case itself as the product customers see and touch. It does not include a ring. A brand can therefore sell the case and a separate Pai8 or CX-5 as a coordinated set without pretending that one finished part contains both functions.
What to decide before asking for samples
- Choose the commercial model first. An integrated ring is one SKU; a separate holder is a case SKU plus an accessory SKU. Decide which one your sales channel can explain and replenish.
- List every phone fit and ring colour. A colour change on an integrated case may create a separate finished SKU. On a separate holder, it may affect only the accessory line.
- Send the real case surface. For a separate ring holder, a photo of the back is not enough. State the material, coating and texture, then test the exact surface during sampling.
- Confirm ring movement and mounting use. Decide whether the customer mainly needs one-hand grip, video support, magnetic car mounting, or more than one of these.
- Approve one variable at a time. Check the case fit and surface first, then the ring position or holder adhesion, then logo and packaging.
OEM terms and the information we need
Ready-molded models start at 50 pcs per model, with custom logo, colour and retail packaging. Samples take 7-10 working days after the artwork and configuration are confirmed; mass production takes 7-12 days after sample approval, followed by 3-5 days for packing and final inspection, FOB Shenzhen. These terms apply to the models already on tooling. A new integrated ring case is a development project and is reviewed separately.
| What to send | Why we need it |
|---|---|
| Product route | Integrated ring case, or case plus separate ring holder |
| Phone model and case material | Confirms the body, cut-outs, surface and fit |
| Quantity per model | Ready models start at 50 pcs; mixed-model projects are listed by model |
| Ring function | Grip, stand, magnetic mounting, or a combination |
| Artwork and packaging | Logo file, colour direction and retail format |
| Target market | Use environment, language and retail channel |
| Required delivery date | The date the goods must arrive, not the intended order date |
A clear product claim prevents a return
The safest product page separates three functions: protection comes from the case, holding and support come from the ring holder, and magnetic mounting comes from the magnetic components in the phone, case or holder. For an integrated ring case, all three are sold as one construction. For a separate system, the brand has to show how the parts meet. Put the exact model name, whether a ring is included, which surfaces the adhesive is intended for, and any limitations in the listing. That clarity is more useful than adding another keyword to a title.
Need a price for your own model?
Send us your drawing or a reference photo. You will get unit price, sampling time and shipping cost within one working day.
Frequently asked questions
Does the PU Case include a ring?
No. The PU Case is a PU leather and TPU magnetic phone case with a magnetic plate on the back. It works with separate magnetic ring holders and mounts, but it is not an integrated ring case.
What is the difference between a phone case with ring and a separate ring holder?
A phone case with ring has the ring built into one finished product. A separate ring holder attaches to the back of a case with adhesive. The first is one SKU; the second lets the case and holder be stocked, customized and replaced separately.
Which option creates fewer SKUs?
It depends on the range. A separate holder usually reduces case variants because one holder can be planned across several case colours, while adding an accessory line. An integrated case can be simpler for a narrow range with one main phone fit and one ring colour.
Can a separate ring holder attach to a thick or silicone case?
The exact case must be tested. The Pai8 and CX-5 attach with an adhesive back, and low-surface-energy or flexible materials such as silicone can fail at the edge. Send the real case for sampling rather than relying on a generic material description.
Can the separate holder move to a new phone or case?
It is not designed for repeated transfer. Removal can damage the old adhesive or a coated case surface, and a reliable re-install needs new tape. Treat it as a fitted accessory for one phone or case.
What is the MOQ and lead time for the case and holder?
Ready-molded models start at 50 pcs per model. Samples take 7-10 working days after configuration approval, production takes 7-12 days after sample approval, and packing and final inspection take 3-5 days. Terms are FOB Shenzhen.
Models mentioned in this guide